Modelling Overcurrent Protection Relay Using PSCAD at Pencawang Masuk Utama Jasin

Authors

  • M. H. Hairi Universiti Teknikal Malaysia Melaka https://orcid.org/0000-0002-7105-5848
  • A. S. Mohd Isira Universiti Teknikal Malaysia Melaka
  • M. N. Kamarudin Universiti Teknikal Malaysia Melaka
  • M. F. Packeer Mohamed Universiti Sains Malaysia
  • S. A. Sobri Nottingham Trent University

DOI:

https://doi.org/10.54554/ijeeas.2025.8.02.005

Abstract

This paper focuses on modelling 132/11kV Pencawang Masuk Utama (PMU) Jasin, Melaka for assessing the Inverse Definite Minimum Time (IDMT) overcurrent relay in terms of relay response time using PSCAD software. The relay is subjected to various fault conditions such as three phase fault, double phase, and single-phase fault at different point of the network to observe the operating time. To ensure the reliability of the overcurrent relay, the response time has been analysed. The response time were then being verified accordingly and the result shows that relay response time were successfully simulated.

Downloads

Download data is not yet available.

Downloads

Published

2025-10-30

How to Cite

Hairi, M. H., Mohd Isira, A. S., Kamarudin, M. N., Packeer Mohamed, M. F., & Sobri, S. A. (2025). Modelling Overcurrent Protection Relay Using PSCAD at Pencawang Masuk Utama Jasin. International Journal of Electrical Engineering and Applied Sciences (IJEEAS), 8(2). https://doi.org/10.54554/ijeeas.2025.8.02.005

Most read articles by the same author(s)